FAQs
Because suppressing static electricity improves the overall airflow around the vehicle.
The optimal applying position varies depending on the vehicle model. For the best position for each vehicle type, please refer to the official AdPower website.
The accelerator response feels better. Depending on the condition of the engine, further improvement in engine recovery may be expected.
Because suppressing static electricity improves the overall airflow around the vehicle and reduces air resistance. However, the effects obtained will vary depending on the environment.
The effectiveness of the static electricity suppression differs depending on the type of car, and is also affected by the environment in which the car is used. For example, the effectiveness may be difficult to notice in rainy weather or when the air conditioning is being used strongly in summer, but the static electricity suppression effect continues to be provided.
No, it does not. AdPower improves engine performance and airflow by reducing static electricity, so it can be used together with a wide variety of products without any issues.
Although there may be some differences depending on the environment and conditions of use, there is a risk that the static electricity suppression effect may decrease due to the product aging. Also, since it is applied with double-sided tape, the period in which the safety of the applied condition can be maintained is 2 years after installation.
Please wipe the installation area clean with a wet wipe before applying the product. We use a high-spec Japanese double-sided tape.
Yes, you can enjoy AdPower even a brand-new car.
For safety during installation, we use double-sided tape with a strong adhesive. Therefore, when removing the tape, the adhesive may remain on the surface, so we recommend using a sticker remover, or wiping the surface with a wet towel to remove the tape.
We do not recommend this. If you reapply the tape, the adhesive strength of the double-sided tape will decrease. Also, when you remove the tape, it may cause wrinkles in the product or affect the material of the product.