首页 / AdPower_blogs

AdPower_blogs

Ritual to become your own car ~ I will tell you how to make the engine longer life ~

Ritual to become your own car ~ I will tell you how to make the engine longer life ~

1. How long is the life of a car?

Human life is about 80 years old in Japan, isn't it? But what about "cars"?

In order to extend the life of your car and ride it for a long time, it is important to prolong the life of the engine, which is also called the "heart of the car."

I would like to introduce "important things to make the engine last longer," which is also a ritual for getting your car to become your own.

 

2. How to make the engine longer life

"Replacement of oil and oil filter" is the key to making the engine longer life.

Oil is doing a role in lubrication and cooling in the engine, and an oil filter (also known as an oil element) is doing a role in filtering oil stains and dust, which is very important for the proper functioning of the engine.

Therefore, if the oil and oil filter deteriorate, it will cause an engine failure, and in the worst case, the car will not run.

Car with the hood open

>> 1st and 2nd exchange

Whether I buy a new car or a used one, I change the oil and oil filter as soon as the car is delivered. And after running about 500km, change the oil and oil filter again.

Many people may wonder, "Well, it's a waste." "Why do you replace it again?", But I don't know what kind of oil is in it or how it was used in a used car.

In addition, replace the air filter for used cars and the spark plug for motorcycles.

At the same time, the learning function "battery terminal" that learns the driver's habits and daily usage and applies corrections is removed once. By resetting the battery terminal, you can quickly learn your favorite driving.

>> 3rd exchange

And the third oil change is done by judging the familiarity between the oil and the engine from the state at the time of the second oil change, so after driving 500 km. As a guideline, the distance is about 3,000 to 5,000 km.

Now the car or motorcycle is yours!

You will learn how to step on your accelerator, the environment in which you will use it, and your habits, and you will become your favorite car.

Subsequent oil changes are "5,000-10,000km" or "one year later".

If you want to keep driving your car for a long time, we recommend "genuine designated oil" instead of cheap oil.

Of course, change the oil filter at the same time as changing the oil.

 

3. Things to worry about when changing oil and oil filter

"Where should I change the oil?"

"How long does it take?"

"How much is the price?"

I'm still worried about the time and price.

It is common to replace it at a car accessory store such as AUTOBACS, a gas station, or a dealer. The working time is as short as about 30 minutes, and the cost you care about is about 2,000 to 6,000 Japanese yens (please note that it depends on the model!).

When replacing the oil filter, it is common to check the compatibility table provided by the staff of the dealer or car supply store and use the genuine manufacturer's product.

 

4. Summary

I introduced what I always do about changing oil and oil filters!

I'm sure some of you may have different ideas about caring for your engine, but this is my recommended method.

Please try it!

 

Tires are an important part for our life

tire

tires


Last time, I talked a lot about "engine break-in" to make your car your
own.
This time, I would like to talk about "tire break-in".
table of contents.

1. Review from tire knowledge

First, let me talk about tire knowledge.
As a general premise, it is impossible to use used tires. The date of
manufacture and factory can be identified by the symbol printed on
the tire, but the tire begins to deteriorate from the day it is
manufactured. Rubber, which is the main raw material, is vulnerable
to ultraviolet rays, and just as old rubber bands click and cut, tires
also become stiff, reducing grip and cracking. As an example, French
tire manufacturer Michelin collects high-grip tires for unused
motorcycles from the warehouse for a certain period of time from the
date of manufacture. "Because the performance drops and it is
dangerous."
In addition, tires that are assembled on wheels are burned by the heat
of running, and the ears of the tires that come into contact with the
wheels stick to the wheels and become hard, preventing air leakage.
So you can't trust a used tire that you removed from the wheel.
Even if it is an unused tire, tires that have deteriorated due to rain or
sunlight at the store have reduced ride comfort and grip.
When buying a new tire, it is best to buy a new tire that has been in
the early days and has been managed in a warehouse. In addition,
the best tire brand is the one specified as genuine or the one of the
upper model of the same series, but there are requests such as "I am
worried about tire noise", "I want to emphasize wet performance", "I
want to emphasize dry performance" etc. For example, consult a tire
advisor to decide.
By the way, I am also a tire advisor.
For normal use, the normal tire is the best, but if you have dressed up
or customized and changed the suspension, please decide according
to your preference. If you change the size of your tires or wheels, you
will need to consult your store's tire advisor to change the alignment
and air pressure. It is difficult to balance the appearance and drive
comfortable, so please consult with your wallet and a specialist to
determine the ideal you are looking for.
The price of the tires you worry about varies depending on the size of
the vehicle and the size of the tires, but in the case of the Prius (195 /
65R) it is about 6,000 yen per tire, and if it is high, it will exceed
20,000 yen per tire.
Tire life is 30,000 to 50,000 km or 3 to 5 years for summer tires. If the
tire groove is 1.6 mm or less, it violates the Road Traffic Act, and the
passing line of the vehicle inspection is also 1.6 mm.

2. About break-in of tires

So much for the long introduction, let's talk about the main theme,
"tire break-in."
After replacing the tire with a new one, the tire is conditioned, but
when the new tire is assembled on the wheel and inflated to increase
the pressure inside the tire, the tire swells. In addition, the weight of
the car causes it to bend.
By running for a certain period of time in this state, the tires and
wheels will stick together due to the heat of running, air leakage will
disappear, and the entire tire will be burnt.
Depending on the driving conditions at this time, the quality of break-
in will change. It is a good condition when driving on a highway that
can run at the same speed with less unevenness on the road and no
start and stop. This is because once you start driving, you will not
stop, you will be able to keep a constant number of revolutions, and
the heat will be evenly applied.
After driving about 50km, I think the tires and wheels are getting hot
overall.
After driving, if the tires and wheels cool to almost room temperature,
the break-in is finished and the tires will harden in a shape that
matches the wheel size.
Tire break-in is to be in close contact with the wheel and to have a
shape that matches the weight and size of the vehicle.
So I can't trust used tires.

many tires

After that, if you rotate the tires at regular intervals, it will be longer
life. If the tires are worn out or unevenly worn, they are out of
alignment and should be adjusted. Also, it is not recommended to
remove it from the foil and rearrange the front and back of the tire.
By the way, the air pressure of my car is 10% higher than the
specified air pressure because it is mainly used on general roads, but
it is 20% higher on expressways in the summer.
It is best to replace a flat tire with a new one, but due to wallet
circumstances, we may repair and use it. Since the fiber belt of the
structure inside the tire is broken, please use it as a rear tire or drive
comfortably and quietly.
If it is a motorcycle, it will be replaced immediately.

3. Will new tires slip? Noisy?

It is often said that "new tires slip" and "noisy", but they slip because
they are before the tires are conditioned and peeled off. Since it is
molded with a metal mold in the manufacturing process, the surface
is slippery. Furthermore, the sound changes when the tread pattern
(jagged tires) changes.

4. Summary

It is said that "tires carry our life", and I think that's right.
Warming up and maintenance are very important because it is a car
that saves lives.
Next time, I will talk about "puncture prevention driving method"!


>>Word explanation
·suspension
Parts between the tires and the car body that cushion the impact from
the road surface and improve the driving comfortable.
·alignment
Also known as "wheel alignment". Subtle tire-to-car angle distortion
caused by driving. By adjusting the deviation, the tires will wear out
evenly and will be longer life.

The secret story of the birth of "AdPower" ~ I want to talk about the reason why the patented product was created and my passion!

The secret story of the birth of "AdPower" ~ I want to talk about the reason why the patented product was created and my passion!

many bikes in developing countries

1. It started 13 years ago 

We established the "Tomizawa Fund" in 2007 and started a business.

However, the year after the establishment, the financial crisis provided an opportunity to transform the business, and I was thinking about how to restart it.

At that time, I visited Asian countries for the first time in a long time since I was a student.
A large number of cars and motorcycles ran around the city, and when I saw the stagnant sky, I was shocked by the transformation.

It definitely causes health problems such as asthma in children, and I thought, "If nothing is done, there will be not only the city but aloso the global environment will only deteriorate ".

 

Governments and automakers in each country are working to reduce emissions by developing new cars, but they have not taken effective solutions against sold cars that run every day.

Furthermore, in developing countries, the quality of gasoline is poor and it is difficult to buy expensive genuine parts, so maintenance will be performed with inexpensive parts. Then the engine combustion gets worse and the exhaust gas just increases.

 

2. Finally to the development of "AdPower"

Therefore, I started research and development with the thought, "Is there a breakthrough solution to reduce exhaust gas for automobiles around the world?"

My inexperienced in the automobile industry, on the other hnad, made it possible to think from various perspectives without being bound by preconceived ideas.

This is because, until now, in order to reduce exhaust gas, it was common knowledge to collect exhaust gas after combustion in the engine combustion chamber with a DPF (diesel particulate filter). However, the high cost of the equipment and the need for work at automobile repair garage to install it have been major obstacles to its widespread use, especially in developing countries.

Therefore, I changed my mind and thought that it might be possible to promote combustion and reduce the amount of exhaust gas emitted, and started research on after-parts that improve engine combustion.

Until we achieved at the basic technology of AdPower, we investigated the advantages of various raw materials, and it was a "continuous trial and error" such as how to install and the shape of the product.

For example, the fiberglass used in the third layer is made using other materials, and a running test, engine output test, exhaust gas check ... This process is repeated every time the raw material or composition is changed.

Power check image

These days have been going on for over a year.

 

3. Gradually recognize "AdPower"

Since then, as a result of steadily accumulating the "AdPower movement", it has gradually come to be recognized.

Finally, two years later, in 2017, I got the long-sought patent ↓ ↓ ↓

patient

Furthermore, we were adopted the 2017 manufacturing subsidy, it was selected as one of the 10 achievement casebooks ↓ ↓ ↓

Published in CarGoodsMagazine

 

4. AdPower breaks common sense

Of course, obtaining a patent is not our goal. To reduce emissions around the world, we must take steps for each and every car in the world that is already running. And now the world is clearly experiencing air pollution and global warming, and there is no waiting.

With AdPower, the installation is very easy and low cost. I am convinced that this small seal-laminate is a reasonable way to recover engine performance, reduce emissions by 20-50% and prevent global warming.

The current goal is "to reduce the world's exhaust gas and contribute to the long life of my car." Tomizawa & Co., Ltd. will continue its efforts to make it happen.

Please look forward to the big innovation of cars created by Tomizawa & Co., Ltd.

 

 

Company Profile

Company name: Tomizawa & Co., Ltd.

Established: September 5, 2007

Capital: 20 million yen

Address: 216 Nibancho Heim, 1 Nibancho, Chiyoda-ku, Tokyo

Managing Director: Toru Tomizawa

Contract research: Ochiai Laboratory, Department of Mechanical Engineering, Faculty of Engineering, Tokai University